Golden State Emissions / CCD

CARB CERTIFIED DEVICE

Clean Truck CheckGSE Continuously Connected Device with J1939 and OBD II diagnostic cables
CARB CERTIFIED CTC TESTING DEVICEClean Truck Check · Continuously Connected Device

Plug it in.
Keep moving.
Test automatically.

Automatic CARB Clean Truck Check testing and reporting for eligible diesel trucks. A Continuously Connected Device works in the background during normal vehicle operation, capturing emissions data while the truck is stationary and idling.

No routine testing appointments. Less scheduling. More time on the road.

Testing increases October 1, 2027

OBD-equipped vehicles will need Clean Truck Check testing four times per year. Non-OBD vehicles remain on a twice-yearly schedule; qualifying agricultural vehicles and noncommercial motorhomes retain their annual-testing exception. Check your CTC-VIS account for your vehicle's deadlines. View CARB testing requirements.

Get your fleet connectedCheck compatibility

An eligible vehicle, active service, a functioning emissions system, and device connectivity are required. Automatic testing does not guarantee a passing result.

Clean Truck Check Credentialed Tester
Clean Truck Check

CARB-certified device.
GSE expertise.

Automatic emissions testing and reporting with a CARB-certified Continuously Connected Device. Backed by Golden State Emissions and our credentialed Clean Truck Check testing team.

01 / Keep working

Reduce routine downtime.

The CCD captures supported emissions data while the truck is stationary and idling, then sends the report automatically. If the truck moves during capture, it retries later.

02 / Connect once

Automate reporting.

Once connected and activated, the device automates supported Clean Truck Check tests and reports results to CARB.

03 / Stay in control

Manage your fleet.

Annual subscription billing and customer account access will help you manage your devices and service.

Check the engine, not just the truck

2013 or newer diesel engine.

The ENGINE must be model year 2013 or newer.
Some 2013 trucks have a 2012 engine. Check the engine emissions label before ordering. Truck model year and VIN alone do not confirm engine eligibility.

OBD II or J1939

Choose the connector for each vehicle. Unsure which port you have? Request a compatibility review.

Direct or Y-cable

Choose direct plug-and-play or a Y-cable. Y-cables have no additional charge.

GPS or telematics?

Tell us whether a device already occupies the diagnostic port. Shared-port configurations need review; a Y-cable alone does not establish compatibility.

Engine replacements, alternative-fuel vehicles, unusual connectors, and uncertain configurations require compatibility review before enrollment.

Configure every vehicle individually

One fleet. The right setup for each truck.

Each device is matched to its own vehicle details, engine year, connector, and cable choice.

Your company & shipping

  • Company or owner name
  • Email address and phone number
  • Shipping recipient and full shipping address
  • Billing details at secure checkout

For EACH vehicle

  • Full 17-character VIN
  • License plate number and registration state
  • DMV registration expiration date
  • Engine model year
  • OBD II or J1939 connector
  • Direct plug-and-play or Y-cable
  • Whether GPS/telematics occupies the port

Use the expiration date printed on the current registration, not the vehicle purchase date or the date fees were paid. Out-of-state, exempt, or previously California-registered vehicles may also require the assigned CTC-VIS compliance deadline.

Uncertain about compatibility?

We can review the engine emissions label, diagnostic port, and existing telematics before you order.

Call (925) 354-4370Call (925) 818-1831Email for compatibility help

Configure your CCDs

Pre-2027 early buyer savings — save $99 per device. Setup: $99 $0.

Initial membership: $399 per device for 12 months plus 7 days from checkout to allow for activation and delivery. Then $399 per device every 12 months, plus applicable taxes, until cancelled. No manual activation-date entry is required. Free standard shipping is included with your initial leased device shipment. Applicable taxes are shown at checkout. Annual renewals do not include another device shipment. No extra charge for a Y-cable. Choose your device count, configure each vehicle, then review your order.

Configure this vehicle

The ENGINE must be model year 2013 or newer. Some 2013 trucks have 2012 engines. Verify the engine emissions label.

Match the diagnostic port on your truck

Identification illustrations, not wiring diagrams. Actual appearance varies. Shape alone does not confirm compatibility; choose “Not sure” below if uncertain.

For California registration, enter the expiration date printed on the DMV registration, not the issue date. For out-of-state vehicles, leave this date blank and request review of the vehicle’s CTC-VIS testing deadline.

Unsure about compatibility, engine year, connector, or an occupied diagnostic port? Request compatibility review or call (925) 354-4370 or (925) 818-1831 before ordering. Do not send registration documents by email unless requested through an agreed secure method.

Review vehicles & checkout

Before you connect

Clear answers. Confident ordering.

Is every 2013 truck eligible?

No. The diesel ENGINE must be model year 2013 or newer. Some 2013 trucks have a 2012 engine. Your specific engine, vehicle, connector, and device combination must also be compatible.

What do I pay initially and at renewal?

With the pre-2027 early buyer savings, pay $399 per device initially. The regular $99 setup fee is waived - a $99 saving per device. Your first term includes 12 months plus 7 days from checkout for activation and delivery. After that, renewals are $399 per device every 12 months. No manual activation-date entry is required. Free standard initial device shipping is included. Applicable taxes are added at checkout. Shipping does not renew annually. CARB program fees are separate.

Can I order multiple devices?

Yes.

Does the Y-cable cost extra?

No. A Y-cable is included at no additional charge. Let us know if GPS or telematics already uses the port so the shared connection can be reviewed.

Which registration date is required?

The DMV registration EXPIRATION date printed on the current registration. California testing deadlines are generally linked to this date. Your CTC-VIS account is the source for the assigned compliance deadline, especially if registration details have changed.

Does a CCD guarantee compliance?

No. It automates supported emissions tests and reporting, but does not repair faults or guarantee a passing result. Owners remain responsible for maintenance, CTC-VIS enrollment, CARB fees, and other applicable requirements.

What if I do not know my engine year or connector?

Request a compatibility review before ordering. We can review your vehicle information and photos of the engine emissions label and diagnostic port. Do not guess a connector type.

Veteran-owned / California focused

Less scheduling.
More time on the road.

Golden State Emissions helps fleets and owner-operators choose the right Clean Truck Check solution.

(925) 354-4370(925) 818-1831